Archived Pages from 20th Century!!
to Ozark Ideas!
Take a look at this fantastic product!
You are visitor #
PREVENT SEVERE FINGER INJURIES COMMON WITH SELF-CL0SING DOORS!
Every year, thousands of children have their fingers smashed or
even amputated by self-closing doors. The FingerSaver(TM) was developed
to prevent such injuries by guarding the gap between the door jamb and
the inside edge o fhe door, where cutting pressure in excess of 1,000 pounds
may occur. When installed properly, this product will help protect your
family's fingers from such severe accidents.
Helps Prevent Finger lnjunries*
A Must For All Self-Closing Doors
Easy To install
Fits Any Size Door
For Residential Or Commercial Use
*When used according to instrucions,
this product can help prevent serious injuries caused by finger entrapment
between door and door jamb.
1. With door in open position, place
FingerSaver(TM) against door jamb and
across gap between jamb and door
(SEE ILLUSTRATION AT LEFT). Flap
must overlap edge of door by 1/4" to 3/8".
2. Secure Finsersaver(TM) to door jamb with screws (do not over-tighten).
If necessary (for example, with an aluminum jamb), drill 1/8" pilot holes
before installing screws. Paint or contact paper may be applied to match
NOTE: This product's excellent wearing properties
may be reduced by exposure to ultraviolet rays. To ensure maximum life,
do not install in direct sunlight.
THE FINGER SAVER
+ $4.95 S&H
DEALER INQUIRIES WELCOME
If you would like to order this product, you can e-mail
us, or you can contact us at:
P.O. Box 1920
Nixa, MO 65714